# AEG dishwasher i23 code Canonical page: https://getfixfault.com/guides/aeg-dishwasher-i23-code AI-readable URL: https://getfixfault.com/guides/aeg-dishwasher-i23-code.txt Last reviewed: 2026-08-03 ## Direct answer AEG Dishwasher i23: Drain-pump cover loose or missing. This interpretation applies to AEG dishwashers covered by the linked support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Dishwasher - Error code or indicator: i23 - Model scope: AEG dishwashers covered by the linked support article - Region: United Kingdom / English ## What users may observe - i23 is shown on the AEG dishwasher display, indicator, or connected app - The published condition is: Drain-pump cover loose or missing - Water or condensate does not leave through the documented drain path as expected while i23 is active - The important observation is when i23 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Drain-pump cover loose or missing - i23 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to AEG dishwashers covered by the linked support article ## Verified diagnosis - Photograph the complete i23 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG dishwashers covered by the linked support article - Confirm that the observed condition matches the published meaning: Drain-pump cover loose or missing - Stop the dishwasher and disconnect the mains plug - Remove the filter system - Sponge out residual water - Pull the plastic pump cover up at an angle and inspect the impeller and surrounding area for glass, plastic, bones, or other debris - Refit the cover so it is not loose, reinstall the filter, reconnect power, and run one test - Published check — AEG identifies i23 as a loose or missing drain-pump cover - Published check — Its user-accessible procedure is to isolate power, remove the filter and residual water, lift the cover, remove visible foreign objects carefully, refit the cover securely, reinstall the filter, and test once ## Evidence-backed actions - AEG identifies i23 as a loose or missing drain-pump cover - Its user-accessible procedure is to isolate power, remove the filter and residual water, lift the cover, remove visible foreign objects carefully, refit the cover securely, reinstall the filter, and test once - Arrange service if i23 returns or the pump cover is damaged - Give service the i23 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Switch the dishwasher off before cleaning user-accessible parts. Hidden glass may be present near the filter and pump cover. ## Primary evidence - Source: AEG support: dishwasher i23 - Source URL: https://support.aeg.co.uk/support-articles/article/dishwasher-displays-error-code-i23-not-draining - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.