# AEG dishwasher i28 code Canonical page: https://getfixfault.com/guides/aeg-dishwasher-i28-code AI-readable URL: https://getfixfault.com/guides/aeg-dishwasher-i28-code.txt Last reviewed: 2026-08-03 ## Direct answer AEG Dishwasher i28: Drain-pump malfunction. This interpretation applies to AEG dishwashers covered by the linked support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Dishwasher - Error code or indicator: i28 - Model scope: AEG dishwashers covered by the linked support article - Region: United Kingdom / English ## What users may observe - i28 is shown on the AEG dishwasher display, indicator, or connected app - The published condition is: Drain-pump malfunction - Water or condensate does not leave through the documented drain path as expected while i28 is active - The important observation is when i28 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Drain-pump malfunction - i28 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to AEG dishwashers covered by the linked support article ## Verified diagnosis - Photograph the complete i28 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG dishwashers covered by the linked support article - Confirm that the observed condition matches the published meaning: Drain-pump malfunction - Stop the dishwasher - Close the water tap - Record the exact error code and appliance model number - Contact an AEG Authorised Service Centre - Published check — AEG identifies i28 as a drain-pump malfunction - Published check — Its published instruction is to close the water tap and contact an Authorised Service Centre - Published check — No external drain-pump repair is verified for this code ## Evidence-backed actions - AEG identifies i28 as a drain-pump malfunction - Its published instruction is to close the water tap and contact an Authorised Service Centre - No external drain-pump repair is verified for this code - Give service the i28 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks. ## Primary evidence - Source: AEG support: dishwasher i28 - Source URL: https://support.aeg.co.uk/support-articles/article/dishwasher-displays-error-code-i28-not-draining - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.