# AEG Dishwasher i44 error

Canonical page: https://getfixfault.com/guides/aeg-dishwasher-i44-official-code
AI-readable URL: https://getfixfault.com/guides/aeg-dishwasher-i44-official-code.txt
Last reviewed: 2026-08-24

## Direct answer

AEG Dishwasher i44: pressure-sensor problem. This interpretation applies to AEG dishwashers covered by the linked UK support article in United Kingdom / English.

## Exact scope

- Brand: AEG
- Appliance: Dishwasher
- Error code or indicator: i44
- Model scope: AEG dishwashers covered by the linked UK support article
- Region: United Kingdom / English

## What users may observe

- i44 is shown on the AEG dishwasher display, indicator, or connected app
- The published condition is: pressure-sensor problem
- The control cannot confirm the documented measured condition or sensor reference represented by i44
- The important observation is when i44 appears and whether the exact published action changes that condition

## Causes or fault boundaries

- Manufacturer-defined fault area — pressure-sensor problem
- i44 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
- Model boundary — apply this interpretation only to AEG dishwashers covered by the linked UK support article

## Verified diagnosis

- Photograph the complete i44 display before changing controls or removing power
- Confirm that the full model number is covered by this scope: AEG dishwashers covered by the linked UK support article
- Confirm that the observed condition matches the published meaning: pressure-sensor problem
- Published check — clean accessible filters as the model manual permits, run no repeated cycles, and arrange service if the code remains
- Stop at the published service boundary after these actions
- do not add a restart or test cycle that AEG does not specify for i44
- Published check — Give service the i44 photo, full model and serial number, when it appeared, and the result of every published external check
- Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for i44

## Evidence-backed actions

- clean accessible filters as the model manual permits, run no repeated cycles, and arrange service if the code remains
- Give service the i44 photo, full model and serial number, when it appeared, and the result of every published external check

## Safety boundary

Isolate the appliance when safe. clean accessible filters as the model manual permits, run no repeated cycles, and arrange service if the code remains Do not open fixed panels or test live circuits.

## Primary evidence

- Source: AEG dishwasher i40/i43/i44 support
- Source URL: https://support.aeg.co.uk/support-articles/article/dishwasher-displays-error-code-i40-i43-or-i44
- Source checked: 2026-08-24
- Procedure verified: 2026-08-24

Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.