# AEG Dryer C6 error Canonical page: https://getfixfault.com/guides/aeg-dryer-c6-official-code AI-readable URL: https://getfixfault.com/guides/aeg-dryer-c6-official-code.txt Last reviewed: 2026-08-24 ## Direct answer AEG Dryer C6: moisture-sensor problem. This interpretation applies to AEG tumble-dryer models covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Dryer - Error code or indicator: C6 - Model scope: AEG tumble-dryer models covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - C6 is shown on the AEG dryer display, indicator, or connected app - The published condition is: moisture-sensor problem - The control cannot confirm the documented measured condition or sensor reference represented by C6 - The important observation is when C6 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — moisture-sensor problem - C6 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to AEG tumble-dryer models covered by the linked UK support article ## Verified diagnosis - Photograph the complete C6 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG tumble-dryer models covered by the linked UK support article - Confirm that the observed condition matches the published meaning: moisture-sensor problem - Published check — clean only the user-accessible sensor area as the manual permits and arrange service if the code persists - Stop at the published service boundary after these actions - do not add a restart or test cycle that AEG does not specify for C6 - Published check — Give service the C6 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for C6 ## Evidence-backed actions - clean only the user-accessible sensor area as the manual permits and arrange service if the code persists - Give service the C6 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. clean only the user-accessible sensor area as the manual permits and arrange service if the code persists Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG tumble-dryer C6 support - Source URL: https://support.aeg.co.uk/support-articles/article/tumble-dryer-displays-error-message-c6 - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.