# AEG Dryer C8 error Canonical page: https://getfixfault.com/guides/aeg-dryer-c8-official-code AI-readable URL: https://getfixfault.com/guides/aeg-dryer-c8-official-code.txt Last reviewed: 2026-08-24 ## Direct answer AEG Dryer C8: temperature-sensor problem. This interpretation applies to AEG tumble-dryer models covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Dryer - Error code or indicator: C8 - Model scope: AEG tumble-dryer models covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - C8 is shown on the AEG dryer display, indicator, or connected app - The published condition is: temperature-sensor problem - The control cannot confirm the documented measured condition or sensor reference represented by C8 - The important observation is when C8 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — temperature-sensor problem - C8 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to AEG tumble-dryer models covered by the linked UK support article ## Verified diagnosis - Photograph the complete C8 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG tumble-dryer models covered by the linked UK support article - Confirm that the observed condition matches the published meaning: temperature-sensor problem - Published check — record the code and arrange authorised service without opening the dryer or testing the sensor live - Stop at the published service boundary after these actions - do not add a restart or test cycle that AEG does not specify for C8 - Published check — Give service the C8 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for C8 ## Evidence-backed actions - record the code and arrange authorised service without opening the dryer or testing the sensor live - Give service the C8 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. record the code and arrange authorised service without opening the dryer or testing the sensor live Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG tumble-dryer C8 support - Source URL: https://support.aeg.co.uk/support-articles/article/tumble-dryer-displays-error-message-c8 - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.