# AEG Oven F1 error Canonical page: https://getfixfault.com/guides/aeg-oven-f1-official-code AI-readable URL: https://getfixfault.com/guides/aeg-oven-f1-official-code.txt Last reviewed: 2026-08-24 ## Direct answer AEG Oven F1: pyrolytic door-lock or electronics fault. This interpretation applies to AEG integrated ovens covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Oven - Error code or indicator: F1 - Model scope: AEG integrated ovens covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - F1 is shown on the AEG oven display, indicator, or connected app - The published condition is: pyrolytic door-lock or electronics fault - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when F1 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — pyrolytic door-lock or electronics fault - F1 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to AEG integrated ovens covered by the linked UK support article ## Verified diagnosis - Photograph the complete F1 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG integrated ovens covered by the linked UK support article - Confirm that the observed condition matches the published meaning: pyrolytic door-lock or electronics fault - Published check — check the door is fully closed only if safe, isolate power once, and contact an authorised service centre if the code remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that AEG does not specify for F1 - Published check — Give service the F1 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for F1 ## Evidence-backed actions - check the door is fully closed only if safe, isolate power once, and contact an authorised service centre if the code remains - Give service the F1 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. check the door is fully closed only if safe, isolate power once, and contact an authorised service centre if the code remains Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG oven F1 support - Source URL: https://support.aeg.co.uk/support-articles/article/oven-displays-error-code-f1 - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.