# AEG Oven F102 error Canonical page: https://getfixfault.com/guides/aeg-oven-f102-official-code AI-readable URL: https://getfixfault.com/guides/aeg-oven-f102-official-code.txt Last reviewed: 2026-08-24 ## Direct answer AEG Oven F102: oven door or electronics fault. This interpretation applies to AEG integrated ovens covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Oven - Error code or indicator: F102 - Model scope: AEG integrated ovens covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - F102 is shown on the AEG oven display, indicator, or connected app - The published condition is: oven door or electronics fault - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when F102 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — oven door or electronics fault - F102 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to AEG integrated ovens covered by the linked UK support article ## Verified diagnosis - Photograph the complete F102 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG integrated ovens covered by the linked UK support article - Confirm that the observed condition matches the published meaning: oven door or electronics fault - Published check — switch the oven off at the mains for 30 seconds, restore power once, and contact an authorised service centre if the code returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that AEG does not specify for F102 - Published check — Give service the F102 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for F102 ## Evidence-backed actions - switch the oven off at the mains for 30 seconds, restore power once, and contact an authorised service centre if the code returns - Give service the F102 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. switch the oven off at the mains for 30 seconds, restore power once, and contact an authorised service centre if the code returns Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG oven F102 support - Source URL: https://support.aeg.co.uk/support-articles/article/oven-displays-code-f102 - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.