# AEG Refrigerator E07 error Canonical page: https://getfixfault.com/guides/aeg-refrigerator-e07-official-code AI-readable URL: https://getfixfault.com/guides/aeg-refrigerator-e07-official-code.txt Last reviewed: 2026-08-24 ## Direct answer AEG Refrigerator E07: temperature-sensor warning. This interpretation applies to AEG refrigerators and fridge freezers covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Refrigerator - Error code or indicator: E07 - Model scope: AEG refrigerators and fridge freezers covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - E07 is shown on the AEG refrigerator display, indicator, or connected app - The published condition is: temperature-sensor warning - The control cannot confirm the documented measured condition or sensor reference represented by E07 - The important observation is when E07 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — temperature-sensor warning - E07 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to AEG refrigerators and fridge freezers covered by the linked UK support article ## Verified diagnosis - Photograph the complete E07 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG refrigerators and fridge freezers covered by the linked UK support article - Confirm that the observed condition matches the published meaning: temperature-sensor warning - Published check — record the exact code and contact an authorised service centre for a sensor diagnosis - Stop at the published service boundary after these actions - do not add a restart or test cycle that AEG does not specify for E07 - Published check — Give service the E07 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for E07 ## Evidence-backed actions - record the exact code and contact an authorised service centre for a sensor diagnosis - Give service the E07 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. record the exact code and contact an authorised service centre for a sensor diagnosis Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG fridge-freezer E01/E02/E03/E06/E07 support - Source URL: https://support.aeg.co.uk/support-articles/article/fridge-freezer-shows-code-e01-e02-e03-e06-e07-on-the-display - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.