# AEG Robot vacuum E22 error Canonical page: https://getfixfault.com/guides/aeg-robot-vacuum-e22-official-code AI-readable URL: https://getfixfault.com/guides/aeg-robot-vacuum-e22-official-code.txt Last reviewed: 2026-08-24 ## Direct answer AEG Robot vacuum E22: robotic-vacuum charging or system condition. This interpretation applies to AEG robotic vacuum cleaners covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Robot vacuum - Error code or indicator: E22 - Model scope: AEG robotic vacuum cleaners covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - E22 is shown on the AEG robot vacuum display, indicator, or connected app - The published condition is: robotic-vacuum charging or system condition - The affected function behaves as described by the manufacturer while E22 is present - The important observation is when E22 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — robotic-vacuum charging or system condition - E22 identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to AEG robotic vacuum cleaners covered by the linked UK support article ## Verified diagnosis - Photograph the complete E22 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG robotic vacuum cleaners covered by the linked UK support article - Confirm that the observed condition matches the published meaning: robotic-vacuum charging or system condition - Published check — place the robot correctly on its base, clean dry charging contacts and arrange AEG support if the code returns - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if E22 remains, stop and move to exact-model diagnosis - Published check — If E22 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if E22 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - place the robot correctly on its base, clean dry charging contacts and arrange AEG support if the code returns - If E22 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If E22 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. place the robot correctly on its base, clean dry charging contacts and arrange AEG support if the code returns Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG robotic-vacuum E22 support - Source URL: https://support.aeg.co.uk/support-articles/article/robotic-vacuum-cleaner-shows-error-code-e22-on-the-display - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.