# AEG washer EF0 / EF3 code Canonical page: https://getfixfault.com/guides/aeg-washer-ef0-ef3-code AI-readable URL: https://getfixfault.com/guides/aeg-washer-ef0-ef3-code.txt Last reviewed: 2026-08-03 ## Direct answer AEG Washing machine EF0 / EF3: Leak, over-foaming, or unbalanced-load warning. This interpretation applies to AEG front- and top-loading washing machines covered by the linked support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Washing machine - Error code or indicator: EF0 / EF3 - Model scope: AEG front- and top-loading washing machines covered by the linked support article - Region: United Kingdom / English ## What users may observe - EF0 / EF3 is shown on the AEG washing machine display, indicator, or connected app - The published condition is: Leak, over-foaming, or unbalanced-load warning - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when EF0 / EF3 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Leak, over-foaming, or unbalanced-load warning - EF0 / EF3 confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to AEG front- and top-loading washing machines covered by the linked support article ## Verified diagnosis - Photograph the complete EF0 / EF3 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG front- and top-loading washing machines covered by the linked support article - Confirm that the observed condition matches the published meaning: Leak, over-foaming, or unbalanced-load warning - Stop the cycle and look for visible water or excessive foam - Use less detergent and allow foam to subside before retrying - Check the accessible detergent drawer, door seal, inlet-hose connections, and fluff filter if the exact model has one - If laundry is caught in the door seal, disconnect water and power before freeing it - Arrange service if the warning returns or water is visible - Published check — AEG identifies EF0 as a warning that can be caused by leakage, over-foaming, or an unbalanced load - Published check — EF3 indicates leak protection ## Evidence-backed actions - AEG identifies EF0 as a warning that can be caused by leakage, over-foaming, or an unbalanced load - EF3 indicates leak protection - Use the published external checks: reduce excess detergent, clean the accessible dispenser drawer, remove laundry caught in the door seal, inspect visible hose connections, and clean/refit an accessible fluff filter - Do not continue if water is leaking or the warning returns - If EF0 / EF3 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Do not open fixed panels or test live electrical parts. Record the full model number and arrange qualified service if the code returns after the permitted external checks. ## Primary evidence - Source: AEG support: EF0 / EF3 washer warning - Source URL: https://support.aeg.co.uk/support-articles/article/washing-machine-displays-warning-code-ef0 - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.