# AEG Washing machine E10 error Canonical page: https://getfixfault.com/guides/aeg-washing-machine-e10-official-code AI-readable URL: https://getfixfault.com/guides/aeg-washing-machine-e10-official-code.txt Last reviewed: 2026-08-26 ## Direct answer AEG Washing machine E10: water-inlet problem. This interpretation applies to AEG washing-machine models covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Washing machine - Error code or indicator: E10 - Model scope: AEG washing-machine models covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - E10 is shown on the AEG washing machine display, indicator, or connected app - The published condition is: water-inlet problem - The affected fill stage does not receive or confirm the expected water supply while E10 is active - The important observation is when E10 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water-inlet problem - E10 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to AEG washing-machine models covered by the linked UK support article ## Verified diagnosis - Photograph the complete E10 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG washing-machine models covered by the linked UK support article - Confirm that the observed condition matches the published meaning: water-inlet problem - Published check — open the water tap, check household flow, inspect the visible inlet hose and clean its accessible filter as the exact model manual permits, then arrange service if the code returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that AEG does not specify for E10 - Published check — Give service the E10 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for E10 ## Evidence-backed actions - open the water tap, check household flow, inspect the visible inlet hose and clean its accessible filter as the exact model manual permits, then arrange service if the code returns - Give service the E10 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. open the water tap, check household flow, inspect the visible inlet hose and clean its accessible filter as the exact model manual permits, then arrange service if the code returns Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG washing-machine E10/E11/C1 support - Source URL: https://support.aeg.co.uk/support-articles/article/washing-machine-displays-error-code-e10-e11-c1-or-emits-1-beep-1-flash - Source checked: 2026-08-26 - Procedure verified: 2026-08-26 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.