# AEG Washing machine E40 error Canonical page: https://getfixfault.com/guides/aeg-washing-machine-e40-official-code AI-readable URL: https://getfixfault.com/guides/aeg-washing-machine-e40-official-code.txt Last reviewed: 2026-08-27 ## Direct answer AEG Washing machine E40: door-lock problem. This interpretation applies to AEG washing-machine models covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Washing machine - Error code or indicator: E40 - Model scope: AEG washing-machine models covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - E40 is shown on the AEG washing machine display, indicator, or connected app - The published condition is: door-lock problem - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when E40 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — door-lock problem - E40 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to AEG washing-machine models covered by the linked UK support article ## Verified diagnosis - Photograph the complete E40 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG washing-machine models covered by the linked UK support article - Confirm that the observed condition matches the published meaning: door-lock problem - Published check — remove any visible obstruction from the door opening, close the door fully once, and arrange service if the lock warning remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that AEG does not specify for E40 - Published check — Give service the E40 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for E40 ## Evidence-backed actions - remove any visible obstruction from the door opening, close the door fully once, and arrange service if the lock warning remains - Give service the E40 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. remove any visible obstruction from the door opening, close the door fully once, and arrange service if the lock warning remains Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG washing-machine E40 support - Source URL: https://support.aeg.co.uk/support-articles/article/washing-machine-displays-error-code-e40 - Source checked: 2026-08-27 - Procedure verified: 2026-08-27 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.