# AEG Washing machine EA0 error Canonical page: https://getfixfault.com/guides/aeg-washing-machine-ea0-official-code AI-readable URL: https://getfixfault.com/guides/aeg-washing-machine-ea0-official-code.txt Last reviewed: 2026-08-24 ## Direct answer AEG Washing machine EA0: drum-position sensor fault. This interpretation applies to AEG washing-machine models covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Washing machine - Error code or indicator: EA0 - Model scope: AEG washing-machine models covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - EA0 is shown on the AEG washing machine display, indicator, or connected app - The published condition is: drum-position sensor fault - The control cannot confirm the documented measured condition or sensor reference represented by EA0 - The important observation is when EA0 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — drum-position sensor fault - EA0 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to AEG washing-machine models covered by the linked UK support article ## Verified diagnosis - Photograph the complete EA0 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG washing-machine models covered by the linked UK support article - Confirm that the observed condition matches the published meaning: drum-position sensor fault - Published check — stop the washer, record the display and full model number, and arrange authorised service without opening the cabinet - Stop at the published service boundary after these actions - do not add a restart or test cycle that AEG does not specify for EA0 - Published check — Give service the EA0 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for EA0 ## Evidence-backed actions - stop the washer, record the display and full model number, and arrange authorised service without opening the cabinet - Give service the EA0 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. stop the washer, record the display and full model number, and arrange authorised service without opening the cabinet Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG washing-machine EA0 support - Source URL: https://support.aeg.co.uk/support-articles/article/washing-machine-displays-error-message-ea0 - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.