# AEG Washing machine F9 error Canonical page: https://getfixfault.com/guides/aeg-washing-machine-f9-official-code AI-readable URL: https://getfixfault.com/guides/aeg-washing-machine-f9-official-code.txt Last reviewed: 2026-08-27 ## Direct answer AEG Washing machine F9: out-of-balance spin condition. This interpretation applies to AEG washing-machine models covered by the linked UK support article in United Kingdom / English. ## Exact scope - Brand: AEG - Appliance: Washing machine - Error code or indicator: F9 - Model scope: AEG washing-machine models covered by the linked UK support article - Region: United Kingdom / English ## What users may observe - F9 is shown on the AEG washing machine display, indicator, or connected app - The published condition is: out-of-balance spin condition - The cycle cannot continue normally until the documented load or levelling condition is corrected - The important observation is when F9 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — out-of-balance spin condition - F9 does not alone prove a motor or suspension failure before load distribution and installation stability are checked - Model boundary — apply this interpretation only to AEG washing-machine models covered by the linked UK support article ## Verified diagnosis - Photograph the complete F9 display before changing controls or removing power - Confirm that the full model number is covered by this scope: AEG washing-machine models covered by the linked UK support article - Confirm that the observed condition matches the published meaning: out-of-balance spin condition - Published check — redistribute the load, confirm the appliance is stable, and run one suitable spin test before arranging service if the code repeats - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F9 remains, stop and move to exact-model diagnosis - Published check — If F9 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F9 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - redistribute the load, confirm the appliance is stable, and run one suitable spin test before arranging service if the code repeats - If F9 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F9 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. redistribute the load, confirm the appliance is stable, and run one suitable spin test before arranging service if the code repeats Do not open fixed panels or test live circuits. ## Primary evidence - Source: AEG washing-machine C9/F9 support - Source URL: https://support.aeg.co.uk/support-articles/article/washing-machine-displays-error-message-c9-or-f9 - Source checked: 2026-08-27 - Procedure verified: 2026-08-27 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.