# Beko Air conditioner Run lamp ×5 error Canonical page: https://getfixfault.com/guides/beko-air-conditioner-run-lamp-5-bfyti360-bfyti361-official-code AI-readable URL: https://getfixfault.com/guides/beko-air-conditioner-run-lamp-5-bfyti360-bfyti361-official-code.txt Last reviewed: 2026-08-14 ## Direct answer Beko Air conditioner Run lamp ×5: outdoor-discharge-temperature protection, incorrect electrical connections, high current, or high pressure. This interpretation applies to Beko BFYTI360 / BFYTI361 models covered by the linked official user manual in Iraq / English. ## Exact scope - Brand: Beko - Appliance: Air conditioner - Error code or indicator: Run lamp ×5 - Model scope: Beko BFYTI360 / BFYTI361 models covered by the linked official user manual - Region: Iraq / English ## What users may observe - Run lamp ×5 is shown on the Beko air conditioner display, indicator, or connected app - The published condition is: outdoor-discharge-temperature protection, incorrect electrical connections, high current, or high pressure - The measured temperature condition does not match the operating range represented by Run lamp ×5 - The important observation is when Run lamp ×5 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — outdoor-discharge-temperature protection, incorrect electrical connections, high current, or high pressure - Run lamp ×5 identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault - Model boundary — apply this interpretation only to Beko BFYTI360 / BFYTI361 models covered by the linked official user manual ## Verified diagnosis - Photograph the complete Run lamp ×5 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Beko BFYTI360 / BFYTI361 models covered by the linked official user manual - Confirm that the observed condition matches the published meaning: outdoor-discharge-temperature protection, incorrect electrical connections, high current, or high pressure - Published check — Switch the unit off and isolate its power - Published check — Record the run-lamp flash count and arrange qualified Beko service - Published check — do not open the electrical or refrigerant system - Stop at the published service boundary after these actions - do not add a restart or test cycle that Beko does not specify for Run lamp ×5 - Published check — Give service the Run lamp ×5 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Beko does not specify for Run lamp ×5 ## Evidence-backed actions - Switch the unit off and isolate its power - Record the run-lamp flash count and arrange qualified Beko service - do not open the electrical or refrigerant system - Give service the Run lamp ×5 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow only the official Beko instructions for the exact model family. Switch the unit off and isolate its power. Record the run-lamp flash count and arrange qualified Beko service; do not open the electrical or refrigerant system. Do not open fixed panels, live electrical areas, or sealed refrigerant systems. ## Primary evidence - Source: Beko BFYTI360 / BFYTI361 official user manual - Source URL: https://www.beko.com/content/dam/iraq-iq-aem/iraq-iq-aemProductCatalog/product-documents/8897143200-BFYTI-360-BFYTI-361/en-US-8897143200-MDM2-USER-MANUAL-FILE-en-US.pdf - Source checked: 2026-08-14 - Procedure verified: 2026-08-14 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.