# Beko Cooktop E16–E21 error Canonical page: https://getfixfault.com/guides/beko-cooktop-e16-e21-hixi84700up-official-code AI-readable URL: https://getfixfault.com/guides/beko-cooktop-e16-e21-hixi84700up-official-code.txt Last reviewed: 2026-08-14 ## Direct answer Beko Cooktop E16–E21: a temperature-sensor error. This interpretation applies to Beko HIXI84700UP models covered by the linked official user manual in Belgium / English. ## Exact scope - Brand: Beko - Appliance: Cooktop - Error code or indicator: E16–E21 - Model scope: Beko HIXI84700UP models covered by the linked official user manual - Region: Belgium / English ## What users may observe - E16–E21 is shown on the Beko cooktop display, indicator, or connected app - The published condition is: a temperature-sensor error - The control cannot confirm the documented measured condition or sensor reference represented by E16–E21 - The important observation is when E16–E21 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a temperature-sensor error - E16–E21 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Beko HIXI84700UP models covered by the linked official user manual ## Verified diagnosis - Photograph the complete E16–E21 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Beko HIXI84700UP models covered by the linked official user manual - Confirm that the observed condition matches the published meaning: a temperature-sensor error - Published check — Switch the hob off, wait 30 seconds, and restart it once - Published check — If the code returns, leave the hob off and arrange authorized service - Published check — do not test the sensor circuit live - Stop at the published service boundary after these actions - do not add a restart or test cycle that Beko does not specify for E16–E21 - Published check — Give service the E16–E21 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Beko does not specify for E16–E21 ## Evidence-backed actions - Switch the hob off, wait 30 seconds, and restart it once - If the code returns, leave the hob off and arrange authorized service - do not test the sensor circuit live - Give service the E16–E21 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow only the official Beko instructions for the exact model family. Switch the hob off, wait 30 seconds, and restart it once. If the code returns, leave the hob off and arrange authorized service; do not test the sensor circuit live. Do not open fixed panels, live electrical areas, or sealed refrigerant systems. ## Primary evidence - Source: Beko HIXI84700UP official user manual - Source URL: https://www.beko.com/content/dam/belgium-be-aem/belgium-be-aemProductCatalog/product-documents/7757183605-HIXI84700UP/en-US-7757183605-MDM2-USER-MANUAL-FILE-en-US.pdf - Source checked: 2026-08-14 - Procedure verified: 2026-08-14 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.