# Beko Cooktop E23 / E24 error Canonical page: https://getfixfault.com/guides/beko-cooktop-e23-e24-hixi84700up-official-code AI-readable URL: https://getfixfault.com/guides/beko-cooktop-e23-e24-hixi84700up-official-code.txt Last reviewed: 2026-08-14 ## Direct answer Beko Cooktop E23 / E24: a software error in the hob control. This interpretation applies to Beko HIXI84700UP models covered by the linked official user manual in Belgium / English. ## Exact scope - Brand: Beko - Appliance: Cooktop - Error code or indicator: E23 / E24 - Model scope: Beko HIXI84700UP models covered by the linked official user manual - Region: Belgium / English ## What users may observe - E23 / E24 is shown on the Beko cooktop display, indicator, or connected app - The published condition is: a software error in the hob control - The appliance has reached the manufacturer-defined stop or service condition associated with E23 / E24 - The important observation is when E23 / E24 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a software error in the hob control - E23 / E24 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Beko HIXI84700UP models covered by the linked official user manual ## Verified diagnosis - Photograph the complete E23 / E24 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Beko HIXI84700UP models covered by the linked official user manual - Confirm that the observed condition matches the published meaning: a software error in the hob control - Published check — Switch the hob off, wait 30 seconds, and restart it once - Published check — If the code returns, stop and arrange authorized service rather than repeating resets - Stop at the published service boundary after these actions - do not add a restart or test cycle that Beko does not specify for E23 / E24 - Published check — Give service the E23 / E24 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Beko does not specify for E23 / E24 ## Evidence-backed actions - Switch the hob off, wait 30 seconds, and restart it once - If the code returns, stop and arrange authorized service rather than repeating resets - Give service the E23 / E24 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow only the official Beko instructions for the exact model family. Switch the hob off, wait 30 seconds, and restart it once. If the code returns, stop and arrange authorized service rather than repeating resets. Do not open fixed panels, live electrical areas, or sealed refrigerant systems. ## Primary evidence - Source: Beko HIXI84700UP official user manual - Source URL: https://www.beko.com/content/dam/belgium-be-aem/belgium-be-aemProductCatalog/product-documents/7757183605-HIXI84700UP/en-US-7757183605-MDM2-USER-MANUAL-FILE-en-US.pdf - Source checked: 2026-08-14 - Procedure verified: 2026-08-14 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.