# Beko dishwasher E02 code Canonical page: https://getfixfault.com/guides/beko-dishwasher-e02-code AI-readable URL: https://getfixfault.com/guides/beko-dishwasher-e02-code.txt Last reviewed: 2026-08-03 ## Direct answer Beko Dishwasher E02: Water supply interruption or inlet filter restriction. This interpretation applies to Beko dishwasher models covered by the linked manual in Türkiye / English translation. ## Exact scope - Brand: Beko - Appliance: Dishwasher - Error code or indicator: E02 - Model scope: Beko dishwasher models covered by the linked manual - Region: Türkiye / English translation ## What users may observe - E02 is shown on the Beko dishwasher display, indicator, or connected app - The published condition is: Water supply interruption or inlet filter restriction - The affected fill stage does not receive or confirm the expected water supply while E02 is active - The important observation is when E02 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Water supply interruption or inlet filter restriction - E02 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Beko dishwasher models covered by the linked manual ## Verified diagnosis - Photograph the complete E02 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Beko dishwasher models covered by the linked manual - Confirm that the observed condition matches the published meaning: Water supply interruption or inlet filter restriction - Switch the dishwasher off and disconnect power - Close the water tap - Check household water supply and the visible inlet hose - Remove the inlet hose only after the tap is closed, then inspect and clean its inlet filter as the Beko manual shows - Reconnect water and power, run one short test, and contact authorised service if E02 returns - Published check — Beko identifies E02 as a water-supply interruption or blocked inlet filter - Published check — Its published procedure is to isolate power and water, remove the inlet hose, clean the filter, reconnect everything, and test once ## Evidence-backed actions - Beko identifies E02 as a water-supply interruption or blocked inlet filter - Its published procedure is to isolate power and water, remove the inlet hose, clean the filter, reconnect everything, and test once - A recurring E02 requires authorised service rather than an inlet-valve replacement from the code alone - Give service the E02 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Switch the dishwasher off before cleaning user-accessible parts. Hidden glass may be present near the filter and pump cover. ## Primary evidence - Source: Beko official dishwasher error codes - Source URL: https://documents.beko.com/DW/7607010277/tr-TR/884097931919208331.html - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.