# Bosch Dishwasher E10 error Canonical page: https://getfixfault.com/guides/bosch-dishwasher-e10-official-code AI-readable URL: https://getfixfault.com/guides/bosch-dishwasher-e10-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Bosch Dishwasher E10: a dishwasher heat-pump or heating condition. This interpretation applies to Bosch dishwasher models covered by the linked Bosch official error-code support page in United States / English. ## Exact scope - Brand: Bosch - Appliance: Dishwasher - Error code or indicator: E10 - Model scope: Bosch dishwasher models covered by the linked Bosch official error-code support page - Region: United States / English ## What users may observe - E10 is shown on the Bosch dishwasher display, indicator, or connected app - The published condition is: a dishwasher heat-pump or heating condition - The documented pump or circulation function does not complete as expected while E10 is active - The important observation is when E10 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a dishwasher heat-pump or heating condition - E10 identifies the pump or circulation path but does not alone prove the pump, obstruction, wiring, or control failed - Model boundary — apply this interpretation only to Bosch dishwasher models covered by the linked Bosch official error-code support page ## Verified diagnosis - Photograph the complete E10 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch official error-code support page - Confirm that the observed condition matches the published meaning: a dishwasher heat-pump or heating condition - Published check — Do not continue heating tests - Published check — record the exact model and arrange Bosch service for E10 - Stop at the published service boundary after these actions - do not add a restart or test cycle that Bosch does not specify for E10 - Published check — Give service the E10 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E10 ## Evidence-backed actions - Do not continue heating tests - record the exact model and arrange Bosch service for E10 - Give service the E10 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Do not continue heating tests; record the exact model and arrange Bosch service for E10. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Bosch US official home-appliance error-code support - Source URL: https://www.bosch-home.com/us/owner-support/get-support/general-error-codes - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.