# Bosch Dishwasher E16 error Canonical page: https://getfixfault.com/guides/bosch-dishwasher-e16-official-code AI-readable URL: https://getfixfault.com/guides/bosch-dishwasher-e16-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Bosch Dishwasher E16: an unintended water-inlet condition. This interpretation applies to Bosch dishwasher models covered by the linked Bosch official error-code support page in United States / English. ## Exact scope - Brand: Bosch - Appliance: Dishwasher - Error code or indicator: E16 - Model scope: Bosch dishwasher models covered by the linked Bosch official error-code support page - Region: United States / English ## What users may observe - E16 is shown on the Bosch dishwasher display, indicator, or connected app - The published condition is: an unintended water-inlet condition - The affected fill stage does not receive or confirm the expected water supply while E16 is active - The important observation is when E16 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — an unintended water-inlet condition - E16 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Bosch dishwasher models covered by the linked Bosch official error-code support page ## Verified diagnosis - Photograph the complete E16 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch official error-code support page - Confirm that the observed condition matches the published meaning: an unintended water-inlet condition - Published check — Close the water tap if the appliance continues filling, isolate power when safe, and arrange Bosch service - Stop at the published service boundary after these actions - do not add a restart or test cycle that Bosch does not specify for E16 - Published check — Give service the E16 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E16 ## Evidence-backed actions - Close the water tap if the appliance continues filling, isolate power when safe, and arrange Bosch service - Give service the E16 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Close the water tap if the appliance continues filling, isolate power when safe, and arrange Bosch service. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Bosch US official home-appliance error-code support - Source URL: https://www.bosch-home.com/us/owner-support/get-support/general-error-codes - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.