# Bosch Dishwasher E24 error

Canonical page: https://getfixfault.com/guides/bosch-dishwasher-e24
AI-readable URL: https://getfixfault.com/guides/bosch-dishwasher-e24.txt
Last reviewed: 2026-08-26

## Direct answer

Bosch Dishwasher E24: a drainage problem associated with a blocked dishwasher filter. This interpretation applies to Bosch dishwasher models covered by the linked official US E24 support article in United States / English.

## Exact scope

- Brand: Bosch
- Appliance: Dishwasher
- Error code or indicator: E24
- Model scope: Bosch dishwasher models covered by the linked official US E24 support article
- Region: United States / English

## What users may observe

- E24 is shown on the Bosch dishwasher display, indicator, or connected app
- The published condition is: a drainage problem associated with a blocked dishwasher filter
- The affected function behaves as described by the manufacturer while E24 is present
- The important observation is when E24 appears and whether the exact published action changes that condition

## Causes or fault boundaries

- Manufacturer-defined fault area — a drainage problem associated with a blocked dishwasher filter
- E24 identifies the documented condition, not a confirmed replacement part
- Model boundary — apply this interpretation only to Bosch dishwasher models covered by the linked official US E24 support article

## Verified diagnosis

- Photograph the complete E24 display before changing controls or removing power
- Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked official US E24 support article
- Confirm that the observed condition matches the published meaning: a drainage problem associated with a blocked dishwasher filter
- Switch the dishwasher off
- Clean the user-accessible filter
- Check the visible drain hose for kinks
- Confirm the pump cover beneath the filter is seated as shown in the exact model manual
- Run one rinse cycle and arrange service if the code remains
- Published check — Switch the dishwasher off
- Published check — Clean and refit the filter

## Evidence-backed actions

- Switch the dishwasher off
- Clean and refit the filter
- Straighten the external drain hose
- Check that the user-accessible pump cover is correctly fitted, using the exact model manual
- Run one rinse cycle
- stop and arrange service if drainage does not return
- Give service the E24 photo, full model and serial number, when it appeared, and the result of every published external check

## Safety boundary

Switch the dishwasher off, clean only the user-accessible filter as the exact model manual shows, and contact Bosch Customer Support if E24 returns. Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior. Do not open fixed panels or test live circuits.

## Primary evidence

- Source: Bosch US dishwasher E24 support
- Source URL: https://www.bosch-home.com/us/owner-support/dishwashers/error-codes/e24
- Source checked: 2026-08-26
- Procedure verified: 2026-08-26

Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.