# Bosch Dishwasher E3000 error Canonical page: https://getfixfault.com/guides/bosch-dishwasher-e3000-batch-100-code AI-readable URL: https://getfixfault.com/guides/bosch-dishwasher-e3000-batch-100-code.txt Last reviewed: 2026-08-10 ## Direct answer Bosch Dishwasher E3000: a flow-meter or dishwasher filling-system fault. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English. ## Exact scope - Brand: Bosch - Appliance: Dishwasher - Error code or indicator: E3000 - Model scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Region: United States / English ## What users may observe - E3000 appears on the dishwasher display - The a flow-meter or dishwasher filling-system fault condition may stop, pause, or limit the appliance - The same code returns when the model-specific condition remains active ## Causes or fault boundaries - a flow-meter or dishwasher filling-system fault - The exact model manual must be used before any internal diagnosis ## Verified diagnosis - Photograph the complete E3000 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Confirm that the observed condition matches the published meaning: a flow-meter or dishwasher filling-system fault - Published check — Check the visible water supply only as the model manual permits - Published check — if the code remains, contact Bosch Customer Support - Stop at the published service boundary after these actions - do not add a restart or test cycle that Bosch does not specify for E3000 - Published check — Give service the E3000 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E3000 ## Evidence-backed actions - Check the visible water supply only as the model manual permits - if the code remains, contact Bosch Customer Support - Give service the E3000 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Check the visible water supply only as the model manual permits; if the code remains, contact Bosch Customer Support. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Bosch US official dishwasher error-code support - Source URL: https://www.bosch-home.com/us/owner-support/dishwashers/error-codes - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.