# Bosch Dishwasher E3100 error Canonical page: https://getfixfault.com/guides/bosch-dishwasher-e3100-batch-100-code AI-readable URL: https://getfixfault.com/guides/bosch-dishwasher-e3100-batch-100-code.txt Last reviewed: 2026-08-10 ## Direct answer Bosch Dishwasher E3100: Leakage protection detected water in the base. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English. ## Exact scope - Brand: Bosch - Appliance: Dishwasher - Error code or indicator: E3100 - Model scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Region: United States / English ## What users may observe - The drain pump may continue running with no program selected - Normal cycles remain locked out - E3100 indicates water in the dishwasher base and active leak protection ## Causes or fault boundaries - Leakage protection detected water in the base ## Verified diagnosis - Photograph the complete E3100 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Confirm that the observed condition matches the published meaning: Leakage protection detected water in the base - Confirm that the observed condition matches the published meaning: water detected in the dishwasher base and the leakage-protection system activated - Published check — Turn off the water inflow immediately and contact Bosch Customer Support - Published check — do not restart the dishwasher to test for a leak - Stop at the published service boundary after these actions - do not add a restart or test cycle that Bosch does not specify for E3100 - Published check — Give service the E3100 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E3100 ## Evidence-backed actions - Turn off the water inflow immediately and contact Bosch Customer Support - do not restart the dishwasher to test for a leak - Give service the E3100 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop the cycle, close the water supply, and isolate power only if the area is dry and access is safe. Do not tilt or open fixed panels. ## Primary evidence - Source: Bosch US official dishwasher error-code support - Source URL: https://www.bosch-home.com/us/owner-support/dishwashers/error-codes - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.