# Bosch Dishwasher E6102 error Canonical page: https://getfixfault.com/guides/bosch-dishwasher-e6102-batch-100-code AI-readable URL: https://getfixfault.com/guides/bosch-dishwasher-e6102-batch-100-code.txt Last reviewed: 2026-08-10 ## Direct answer Bosch Dishwasher E6102: Drain pump is blocked or its cover is loose. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English. ## Exact scope - Brand: Bosch - Appliance: Dishwasher - Error code or indicator: E6102 - Model scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Region: United States / English ## What users may observe - The drain phase runs but water remains in the tub - A pump hum may be audible without normal water flow - The pump cover, drain hose, or air gap may be blocked ## Causes or fault boundaries - Drain pump is blocked or its cover is loose ## Verified diagnosis - Photograph the complete E6102 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Confirm that the observed condition matches the published meaning: Drain pump is blocked or its cover is loose - Confirm that the observed condition matches the published meaning: a blocked drain pump or loose or missing pump cover - Published check — With power isolated, inspect the pump-cover and accessible debris area exactly as Bosch describes - Published check — contact Bosch if the code returns - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if E6102 remains, stop and move to exact-model diagnosis - Published check — If E6102 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis ## Evidence-backed actions - With power isolated, inspect the pump-cover and accessible debris area exactly as Bosch describes - contact Bosch if the code returns - If E6102 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If E6102 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Switch the dishwasher off before cleaning user-accessible parts. Hidden glass may be present near the filter and pump cover. ## Primary evidence - Source: Bosch US official dishwasher error-code support - Source URL: https://www.bosch-home.com/us/owner-support/dishwashers/error-codes - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.