# Bosch Dishwasher E6160 error Canonical page: https://getfixfault.com/guides/bosch-dishwasher-e6160-batch-100-code AI-readable URL: https://getfixfault.com/guides/bosch-dishwasher-e6160-batch-100-code.txt Last reviewed: 2026-08-10 ## Direct answer Bosch Dishwasher E6160: the PowerControl controlled lower spray-arm reference position was not found. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English. ## Exact scope - Brand: Bosch - Appliance: Dishwasher - Error code or indicator: E6160 - Model scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Region: United States / English ## What users may observe - E6160 appears on the dishwasher display - The the PowerControl controlled lower spray-arm reference position was not found condition may stop, pause, or limit the appliance - The same code returns when the model-specific condition remains active ## Causes or fault boundaries - the PowerControl controlled lower spray-arm reference position was not found - The exact model manual must be used before any internal diagnosis ## Verified diagnosis - Photograph the complete E6160 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Confirm that the observed condition matches the published meaning: the PowerControl controlled lower spray-arm reference position was not found - Published check — Do not dismantle the spray-arm drive - Published check — contact Bosch Customer Support for the exact model - Stop at the published service boundary after these actions - do not add a restart or test cycle that Bosch does not specify for E6160 - Published check — Give service the E6160 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E6160 ## Evidence-backed actions - Do not dismantle the spray-arm drive - contact Bosch Customer Support for the exact model - Give service the E6160 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Do not dismantle the spray-arm drive; contact Bosch Customer Support for the exact model. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Bosch US official dishwasher error-code support - Source URL: https://www.bosch-home.com/us/owner-support/dishwashers/error-codes - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.