# Bosch Dishwasher E8000 error Canonical page: https://getfixfault.com/guides/bosch-dishwasher-e8000-batch-100-code AI-readable URL: https://getfixfault.com/guides/bosch-dishwasher-e8000-batch-100-code.txt Last reviewed: 2026-08-10 ## Direct answer Bosch Dishwasher E8000: a door-sensor circuit fault. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English. ## Exact scope - Brand: Bosch - Appliance: Dishwasher - Error code or indicator: E8000 - Model scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Region: United States / English ## What users may observe - E8000 appears on the dishwasher display - The a door-sensor circuit fault condition may stop, pause, or limit the appliance - The same code returns when the model-specific condition remains active ## Causes or fault boundaries - a door-sensor circuit fault - The exact model manual must be used before any internal diagnosis ## Verified diagnosis - Photograph the complete E8000 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page - Confirm that the observed condition matches the published meaning: a door-sensor circuit fault - Published check — Check that the door closes normally, reset power at the breaker for 30 seconds, and contact Bosch if E8000 returns - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if E8000 remains, stop and move to exact-model diagnosis - Published check — If E8000 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if E8000 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Check that the door closes normally, reset power at the breaker for 30 seconds, and contact Bosch if E8000 returns - If E8000 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If E8000 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Check that the door closes normally, reset power at the breaker for 30 seconds, and contact Bosch if E8000 returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Bosch US official dishwasher error-code support - Source URL: https://www.bosch-home.com/us/owner-support/dishwashers/error-codes - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.