# Bosch washing machine E18 / F18 error Canonical page: https://getfixfault.com/guides/bosch-washer-e18-f18 AI-readable URL: https://getfixfault.com/guides/bosch-washer-e18-f18.txt Last reviewed: 2026-08-04 ## Direct answer Bosch Washing machine E18 / F18: The washing machine cannot drain water normally. This interpretation applies to Bosch washing-machine models covered by the linked US E18 support article in United States / English. ## Exact scope - Brand: Bosch - Appliance: Washing machine - Error code or indicator: E18 / F18 - Model scope: Bosch washing-machine models covered by the linked US E18 support article - Region: United States / English ## What users may observe - E18 or F18 appears on the display - Water remains in the drum - The washer stops before or during draining ## Causes or fault boundaries - A kinked or blocked drain hose - A blocked pump or pump cover - Residual hot water that must cool before draining ## Verified diagnosis - Photograph the complete E18 / F18 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch washing-machine models covered by the linked US E18 support article - Confirm that the observed condition matches the published meaning: The washing machine cannot drain water normally - Allow hot water to cool - Unplug the washer and check the drain hose for a kink or blockage - Drain residual water and inspect the accessible pump area as Bosch shows - Run one drain test and stop if E18/F18 returns - Published check — Correct a visible hose restriction and clean the accessible drain or pump area only as Bosch describes - Published check — Refit the pump cover, check for leaks, and arrange service if the code returns - Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E18 / F18 ## Evidence-backed actions - Correct a visible hose restriction and clean the accessible drain or pump area only as Bosch describes - Refit the pump cover, check for leaks, and arrange service if the code returns - Give service the E18 / F18 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Switch the programme off, unplug the washer, and allow hot water to cool before opening the service flap or draining residual water. ## Primary evidence - Source: Bosch US E18 washing-machine support - Source URL: https://www.bosch-home.com/us/owner-support/get-support/e18-in-display - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.