# Bosch washing machine E23 / F23 error Canonical page: https://getfixfault.com/guides/bosch-washer-e23-f23 AI-readable URL: https://getfixfault.com/guides/bosch-washer-e23-f23.txt Last reviewed: 2026-08-07 ## Direct answer Bosch Washing machine E23 / F23: The AquaStop hose has activated because water leakage may be present. This interpretation applies to Bosch washing-machine models covered by the official E23/F23 support article in US / English. ## Exact scope - Brand: Bosch - Appliance: Washing machine - Error code or indicator: E23 / F23 - Model scope: Bosch washing-machine models covered by the official E23/F23 support article - Region: US / English ## What users may observe - E23 / F23 is shown on the Bosch washing machine display, indicator, or connected app - The published condition is: The AquaStop hose has activated because water leakage may be present - The appliance has reached the manufacturer-defined stop or service condition associated with E23 / F23 - The important observation is when E23 / F23 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — The AquaStop hose has activated because water leakage may be present - E23 / F23 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Bosch washing-machine models covered by the official E23/F23 support article ## Verified diagnosis - Photograph the complete E23 / F23 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch washing-machine models covered by the official E23/F23 support article - Confirm that the observed condition matches the published meaning: The AquaStop hose has activated because water leakage may be present - Published check — Turn off the water tap immediately, stop using the washer, inspect only visible dry areas, and arrange Bosch service to locate the leak - Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E23 / F23 ## Evidence-backed actions - Turn off the water tap immediately, stop using the washer, inspect only visible dry areas, and arrange Bosch service to locate the leak - Give service the E23 / F23 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Turn off the water tap immediately, stop using the washer, inspect only visible dry areas, and arrange Bosch service to locate the leak. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Bosch US E23/F23 washing-machine support - Source URL: https://www.bosch-home.com/us/owner-support/get-support/support-selfhelp-washing-error-e23-or-f23-washing-machine - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.