# Bosch washing machine E28 / F28 error Canonical page: https://getfixfault.com/guides/bosch-washer-e28-f28 AI-readable URL: https://getfixfault.com/guides/bosch-washer-e28-f28.txt Last reviewed: 2026-08-04 ## Direct answer Bosch Washing machine E28 / F28: The flow sensor has reported a fault. This interpretation applies to Bosch washing-machine models covered by the linked US E28/F28 support article in United States / English. ## Exact scope - Brand: Bosch - Appliance: Washing machine - Error code or indicator: E28 / F28 - Model scope: Bosch washing-machine models covered by the linked US E28/F28 support article - Region: United States / English ## What users may observe - E28 or F28 appears on the display - The programme may stop or fail to continue - The code returns after a restart ## Causes or fault boundaries - A flow-sensor fault reported by the appliance - A model-specific sensing or control problem ## Verified diagnosis - Photograph the complete E28 / F28 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch washing-machine models covered by the linked US E28/F28 support article - Confirm that the observed condition matches the published meaning: The flow sensor has reported a fault - Record the complete E28/F28 display and model number - Confirm the code against Bosch support - Do not open the washer or test live wiring - Contact Bosch Support with the exact code and model - Published check — Bosch identifies E28/F28 as a flow-sensor issue and directs owners to Support - Published check — No model-independent user repair is verified for this code - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if E28 / F28 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Bosch identifies E28/F28 as a flow-sensor issue and directs owners to Support - No model-independent user repair is verified for this code - If E28 / F28 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Do not open the washer or test live circuits from this code alone. Isolate the appliance if it behaves abnormally and arrange Bosch service. ## Primary evidence - Source: Bosch US E28/F28 washing-machine support - Source URL: https://www.bosch-home.com/us/owner-support/get-support/support-selfhelp-washing-error-e28-or-f28-washing-machine - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.