# Bosch Washing machine E38 / F38 error Canonical page: https://getfixfault.com/guides/bosch-washing-machine-e38-f38-official-code AI-readable URL: https://getfixfault.com/guides/bosch-washing-machine-e38-f38-official-code.txt Last reviewed: 2026-08-07 ## Direct answer Bosch Washing machine E38 / F38: a washing-machine motor or control condition. This interpretation applies to Bosch washing machine models covered by the linked Bosch official error-code support page in United States / English. ## Exact scope - Brand: Bosch - Appliance: Washing machine - Error code or indicator: E38 / F38 - Model scope: Bosch washing machine models covered by the linked Bosch official error-code support page - Region: United States / English ## What users may observe - E38 / F38 is shown on the Bosch washing machine display, indicator, or connected app - The published condition is: a washing-machine motor or control condition - The affected motor, drive, or movement function is stopped or limited while E38 / F38 is active - The important observation is when E38 / F38 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a washing-machine motor or control condition - E38 / F38 identifies a drive condition but does not alone prove the motor, inverter, belt, bearing, rotor, wiring, or control failed - Model boundary — apply this interpretation only to Bosch washing machine models covered by the linked Bosch official error-code support page ## Verified diagnosis - Photograph the complete E38 / F38 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Bosch washing machine models covered by the linked Bosch official error-code support page - Confirm that the observed condition matches the published meaning: a washing-machine motor or control condition - Published check — Stop the washer, isolate power when safe, and arrange Bosch service - Published check — do not open the motor circuit - Stop at the published service boundary after these actions - do not add a restart or test cycle that Bosch does not specify for E38 / F38 - Published check — Give service the E38 / F38 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E38 / F38 ## Evidence-backed actions - Stop the washer, isolate power when safe, and arrange Bosch service - do not open the motor circuit - Give service the E38 / F38 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop the washer, isolate power when safe, and arrange Bosch service; do not open the motor circuit. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Bosch US official home-appliance error-code support - Source URL: https://www.bosch-home.com/us/owner-support/get-support/general-error-codes - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.