# Daikin Air conditioner A5 error Canonical page: https://getfixfault.com/guides/daikin-air-conditioner-a5-official-code AI-readable URL: https://getfixfault.com/guides/daikin-air-conditioner-a5-official-code.txt Last reviewed: 2026-08-18 ## Direct answer Daikin Air conditioner A5: high-pressure control or freeze-up protector operation. This interpretation applies to Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B in Europe / English manual. ## Exact scope - Brand: Daikin - Appliance: Air conditioner - Error code or indicator: A5 - Model scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B - Region: Europe / English manual ## What users may observe - A5 is shown on the Daikin air conditioner display, indicator, or connected app - The published condition is: high-pressure control or freeze-up protector operation - Airflow through the documented filter or vent path is restricted or the maintenance condition remains active - The important observation is when A5 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — high-pressure control or freeze-up protector operation - A5 does not by itself prove a fan, heater, sensor, or control failure before the accessible airflow path is checked - Model boundary — apply this interpretation only to Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B ## Verified diagnosis - Photograph the complete A5 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B - Confirm that the observed condition matches the published meaning: high-pressure control or freeze-up protector operation - Published check — Do not open, charge, vent, or test the sealed refrigerant system - Published check — Record the code, switch the air conditioner off, and contact the Daikin service shop - Published check — the manual says not to repair, dismantle, reinstall, or modify the unit yourself - Stop at the published service boundary after these actions - do not add a restart or test cycle that Daikin does not specify for A5 - Published check — Give service the A5 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Daikin does not specify for A5 ## Evidence-backed actions - Do not open, charge, vent, or test the sealed refrigerant system - Record the code, switch the air conditioner off, and contact the Daikin service shop - the manual says not to repair, dismantle, reinstall, or modify the unit yourself - Give service the A5 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop if there is smoke, a burning smell, damaged wiring, repeated breaker operation, or refrigerant leakage. Do not open, charge, vent, or test the sealed refrigerant system. Record the code, switch the air conditioner off, and contact the Daikin service shop; the manual says not to repair, dismantle, reinstall, or modify the unit yourself. ## Primary evidence - Source: Daikin official FTX25KMV1B / FTX35KMV1B operation manual 3P393186-11R - Source URL: https://www.daikin.eu/content/dam/document-library/operation-manuals/ac/split/ftx-km/FTX25-35KM_3PEN393186-11R_Operation%20manual_English.pdf - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.