# Daikin Air conditioner A6 error Canonical page: https://getfixfault.com/guides/daikin-air-conditioner-a6-official-code AI-readable URL: https://getfixfault.com/guides/daikin-air-conditioner-a6-official-code.txt Last reviewed: 2026-08-18 ## Direct answer Daikin Air conditioner A6: indoor fan-motor fault. This interpretation applies to Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B in Europe / English manual. ## Exact scope - Brand: Daikin - Appliance: Air conditioner - Error code or indicator: A6 - Model scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B - Region: Europe / English manual ## What users may observe - A6 is shown on the Daikin air conditioner display, indicator, or connected app - The published condition is: indoor fan-motor fault - The affected motor, drive, or movement function is stopped or limited while A6 is active - The important observation is when A6 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — indoor fan-motor fault - A6 identifies a drive condition but does not alone prove the motor, inverter, belt, bearing, rotor, wiring, or control failed - Model boundary — apply this interpretation only to Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B ## Verified diagnosis - Photograph the complete A6 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B - Confirm that the observed condition matches the published meaning: indoor fan-motor fault - Published check — Keep hands and tools away from fan blades and do not operate the unit with a fixed cover removed - Published check — Record the code, switch the air conditioner off, and contact the Daikin service shop - Published check — the manual says not to repair, dismantle, reinstall, or modify the unit yourself - Stop at the published service boundary after these actions - do not add a restart or test cycle that Daikin does not specify for A6 - Published check — Give service the A6 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Daikin does not specify for A6 ## Evidence-backed actions - Keep hands and tools away from fan blades and do not operate the unit with a fixed cover removed - Record the code, switch the air conditioner off, and contact the Daikin service shop - the manual says not to repair, dismantle, reinstall, or modify the unit yourself - Give service the A6 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop if there is smoke, a burning smell, damaged wiring, repeated breaker operation, or refrigerant leakage. Keep hands and tools away from fan blades and do not operate the unit with a fixed cover removed. Record the code, switch the air conditioner off, and contact the Daikin service shop; the manual says not to repair, dismantle, reinstall, or modify the unit yourself. ## Primary evidence - Source: Daikin official FTX25KMV1B / FTX35KMV1B operation manual 3P393186-11R - Source URL: https://www.daikin.eu/content/dam/document-library/operation-manuals/ac/split/ftx-km/FTX25-35KM_3PEN393186-11R_Operation%20manual_English.pdf - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.