# Daikin Air conditioner P4 error Canonical page: https://getfixfault.com/guides/daikin-air-conditioner-p4-official-code AI-readable URL: https://getfixfault.com/guides/daikin-air-conditioner-p4-official-code.txt Last reviewed: 2026-08-18 ## Direct answer Daikin Air conditioner P4: inverter-circuit heat-sink temperature sensor fault. This interpretation applies to Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B in Europe / English manual. ## Exact scope - Brand: Daikin - Appliance: Air conditioner - Error code or indicator: P4 - Model scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B - Region: Europe / English manual ## What users may observe - P4 is shown on the Daikin air conditioner display, indicator, or connected app - The published condition is: inverter-circuit heat-sink temperature sensor fault - The affected motor, drive, or movement function is stopped or limited while P4 is active - The important observation is when P4 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — inverter-circuit heat-sink temperature sensor fault - P4 identifies a drive condition but does not alone prove the motor, inverter, belt, bearing, rotor, wiring, or control failed - Model boundary — apply this interpretation only to Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B ## Verified diagnosis - Photograph the complete P4 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B - Confirm that the observed condition matches the published meaning: inverter-circuit heat-sink temperature sensor fault - Published check — Do not probe live wiring, inverter terminals, or control boards - Published check — Record the code, switch the air conditioner off, and contact the Daikin service shop - Published check — the manual says not to repair, dismantle, reinstall, or modify the unit yourself - Stop at the published service boundary after these actions - do not add a restart or test cycle that Daikin does not specify for P4 - Published check — Give service the P4 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Daikin does not specify for P4 ## Evidence-backed actions - Do not probe live wiring, inverter terminals, or control boards - Record the code, switch the air conditioner off, and contact the Daikin service shop - the manual says not to repair, dismantle, reinstall, or modify the unit yourself - Give service the P4 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop if there is smoke, a burning smell, damaged wiring, repeated breaker operation, or refrigerant leakage. Do not probe live wiring, inverter terminals, or control boards. Record the code, switch the air conditioner off, and contact the Daikin service shop; the manual says not to repair, dismantle, reinstall, or modify the unit yourself. ## Primary evidence - Source: Daikin official FTX25KMV1B / FTX35KMV1B operation manual 3P393186-11R - Source URL: https://www.daikin.eu/content/dam/document-library/operation-manuals/ac/split/ftx-km/FTX25-35KM_3PEN393186-11R_Operation%20manual_English.pdf - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.