# Daikin Air conditioner U4 error Canonical page: https://getfixfault.com/guides/daikin-air-conditioner-u4-official-code AI-readable URL: https://getfixfault.com/guides/daikin-air-conditioner-u4-official-code.txt Last reviewed: 2026-08-18 ## Direct answer Daikin Air conditioner U4: transmission failure between indoor and outdoor units. This interpretation applies to Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B in Europe / English manual. ## Exact scope - Brand: Daikin - Appliance: Air conditioner - Error code or indicator: U4 - Model scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B - Region: Europe / English manual ## What users may observe - U4 is shown on the Daikin air conditioner display, indicator, or connected app - The published condition is: transmission failure between indoor and outdoor units - The appliance has reached the manufacturer-defined stop or service condition associated with U4 - The important observation is when U4 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — transmission failure between indoor and outdoor units - U4 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B ## Verified diagnosis - Photograph the complete U4 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B - Confirm that the observed condition matches the published meaning: transmission failure between indoor and outdoor units - Published check — Do not alter inter-unit wiring or piping from the code alone - Published check — Record the code, switch the air conditioner off, and contact the Daikin service shop - Published check — the manual says not to repair, dismantle, reinstall, or modify the unit yourself - Stop at the published service boundary after these actions - do not add a restart or test cycle that Daikin does not specify for U4 - Published check — Give service the U4 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Daikin does not specify for U4 ## Evidence-backed actions - Do not alter inter-unit wiring or piping from the code alone - Record the code, switch the air conditioner off, and contact the Daikin service shop - the manual says not to repair, dismantle, reinstall, or modify the unit yourself - Give service the U4 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop if there is smoke, a burning smell, damaged wiring, repeated breaker operation, or refrigerant leakage. Do not alter inter-unit wiring or piping from the code alone. Record the code, switch the air conditioner off, and contact the Daikin service shop; the manual says not to repair, dismantle, reinstall, or modify the unit yourself. ## Primary evidence - Source: Daikin official FTX25KMV1B / FTX35KMV1B operation manual 3P393186-11R - Source URL: https://www.daikin.eu/content/dam/document-library/operation-manuals/ac/split/ftx-km/FTX25-35KM_3PEN393186-11R_Operation%20manual_English.pdf - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.