# Dyson Air purifier HP02: No power error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-hp02-no-power-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-hp02-no-power-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier HP02: No power: the HP02 does not start after connection to mains. This interpretation applies to Dyson Pure Hot+Cool Link HP02 models covered by the official troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: HP02: No power - Model scope: Dyson Pure Hot+Cool Link HP02 models covered by the official troubleshooting journey - Region: United States / English ## What users may observe - HP02: No power is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the HP02 does not start after connection to mains - The appliance reports the documented supply, interruption, wiring, or power-restoration condition - The important observation is when HP02: No power appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the HP02 does not start after connection to mains - HP02: No power does not alone locate the fault in the outlet, breaker, cord, installation wiring, appliance wiring, or control - Model boundary — apply this interpretation only to Dyson Pure Hot+Cool Link HP02 models covered by the official troubleshooting journey ## Verified diagnosis - Photograph the complete HP02: No power display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Hot+Cool Link HP02 models covered by the official troubleshooting journey - Confirm that the observed condition matches the published meaning: the HP02 does not start after connection to mains - Published check — Check the socket and cable externally, power-cycle once, and stop using the machine if there is cable, plug, or housing damage - Stop at the published service boundary after these actions - do not add a restart or test cycle that Dyson does not specify for HP02: No power - Published check — Give service the HP02: No power photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for HP02: No power ## Evidence-backed actions - Check the socket and cable externally, power-cycle once, and stop using the machine if there is cable, plug, or housing damage - Give service the HP02: No power photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Check the socket and cable externally, power-cycle once, and stop using the machine if there is cable, plug, or housing damage. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Hot+Cool Link HP02 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/309427-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.