# Dyson Air purifier HP04: Heating not working error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-hp04-heating-not-working-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-hp04-heating-not-working-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier HP04: Heating not working: the purifier is not producing the selected heat. This interpretation applies to Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: HP04: Heating not working - Model scope: Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey - Region: United States / English ## What users may observe - HP04: Heating not working is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the purifier is not producing the selected heat - The affected fill stage does not receive or confirm the expected water supply while HP04: Heating not working is active - The important observation is when HP04: Heating not working appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the purifier is not producing the selected heat - HP04: Heating not working does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey ## Verified diagnosis - Photograph the complete HP04: Heating not working display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey - Confirm that the observed condition matches the published meaning: the purifier is not producing the selected heat - Published check — Confirm the temperature is set above room temperature, check the filter and inlet, and stop the test if the machine overheats or displays a fault - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if HP04: Heating not working remains, stop and move to exact-model diagnosis - Published check — If HP04: Heating not working returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if HP04: Heating not working remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Confirm the temperature is set above room temperature, check the filter and inlet, and stop the test if the machine overheats or displays a fault - If HP04: Heating not working returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If HP04: Heating not working returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Confirm the temperature is set above room temperature, check the filter and inlet, and stop the test if the machine overheats or displays a fault. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Hot+Cool HP04 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/248808-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.