# Dyson Air purifier HP04: No power error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-hp04-no-power-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-hp04-no-power-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier HP04: No power: the purifier is not receiving or accepting power. This interpretation applies to Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: HP04: No power - Model scope: Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey - Region: United States / English ## What users may observe - HP04: No power is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the purifier is not receiving or accepting power - The affected function behaves as described by the manufacturer while HP04: No power is present - The important observation is when HP04: No power appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the purifier is not receiving or accepting power - HP04: No power identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey ## Verified diagnosis - Photograph the complete HP04: No power display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey - Confirm that the observed condition matches the published meaning: the purifier is not receiving or accepting power - Published check — Check the socket and cable for visible damage, isolate the machine, reconnect once, and stop using it if the cable or plug is damaged - Stop at the published service boundary after these actions - do not add a restart or test cycle that Dyson does not specify for HP04: No power - Published check — Give service the HP04: No power photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for HP04: No power ## Evidence-backed actions - Check the socket and cable for visible damage, isolate the machine, reconnect once, and stop using it if the cable or plug is damaged - Give service the HP04: No power photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Check the socket and cable for visible damage, isolate the machine, reconnect once, and stop using it if the cable or plug is damaged. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Hot+Cool HP04 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/248808-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.