# Dyson Air purifier HP07: No airflow error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-hp07-no-airflow-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-hp07-no-airflow-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier HP07: No airflow: the purifier does not produce its expected airflow. This interpretation applies to Dyson purifier heaters covered by the official HP07 air-quality journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: HP07: No airflow - Model scope: Dyson purifier heaters covered by the official HP07 air-quality journey - Region: United States / English ## What users may observe - HP07: No airflow is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the purifier does not produce its expected airflow - The affected fill stage does not receive or confirm the expected water supply while HP07: No airflow is active - The important observation is when HP07: No airflow appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the purifier does not produce its expected airflow - HP07: No airflow does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Dyson purifier heaters covered by the official HP07 air-quality journey ## Verified diagnosis - Photograph the complete HP07: No airflow display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson purifier heaters covered by the official HP07 air-quality journey - Confirm that the observed condition matches the published meaning: the purifier does not produce its expected airflow - Published check — Switch off, inspect the filter and external inlet, and arrange Dyson service if airflow does not return after one safe refit and test - Stop at the published service boundary after these actions - do not add a restart or test cycle that Dyson does not specify for HP07: No airflow - Published check — Give service the HP07: No airflow photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for HP07: No airflow ## Evidence-backed actions - Switch off, inspect the filter and external inlet, and arrange Dyson service if airflow does not return after one safe refit and test - Give service the HP07: No airflow photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Switch off, inspect the filter and external inlet, and arrange Dyson service if airflow does not return after one safe refit and test. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official purifier troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/143002-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.