# Dyson Air purifier PC1: HEPA filter alert error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-pc1-hepa-filter-alert-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-pc1-hepa-filter-alert-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier PC1: HEPA filter alert: the HEPA filter is due for replacement. This interpretation applies to Dyson Purifier Cool PC1 models covered by the official product support page in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: PC1: HEPA filter alert - Model scope: Dyson Purifier Cool PC1 models covered by the official product support page - Region: United States / English ## What users may observe - PC1: HEPA filter alert is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the HEPA filter is due for replacement - The affected function behaves as described by the manufacturer while PC1: HEPA filter alert is present - The important observation is when PC1: HEPA filter alert appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the HEPA filter is due for replacement - PC1: HEPA filter alert identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Dyson Purifier Cool PC1 models covered by the official product support page ## Verified diagnosis - Photograph the complete PC1: HEPA filter alert display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Purifier Cool PC1 models covered by the official product support page - Confirm that the observed condition matches the published meaning: the HEPA filter is due for replacement - Published check — Switch off, install the correct genuine HEPA filter for PC1, and reset the filter counter using the model-specific instructions - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if PC1: HEPA filter alert remains, stop and move to exact-model diagnosis - Published check — If PC1: HEPA filter alert returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if PC1: HEPA filter alert remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Switch off, install the correct genuine HEPA filter for PC1, and reset the filter counter using the model-specific instructions - If PC1: HEPA filter alert returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If PC1: HEPA filter alert returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Switch off, install the correct genuine HEPA filter for PC1, and reset the filter counter using the model-specific instructions. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Purifier Cool PC1 support - Source URL: https://www.dyson.com/support/air-treatment/purifiers/purifier-cool-pc1 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.