# Dyson Air purifier TP01: Base vibration error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-tp01-base-vibration-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-tp01-base-vibration-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier TP01: Base vibration: the purifier vibrates during operation. This interpretation applies to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: TP01: Base vibration - Model scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey - Region: United States / English ## What users may observe - TP01: Base vibration is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the purifier vibrates during operation - The affected function behaves as described by the manufacturer while TP01: Base vibration is present - The important observation is when TP01: Base vibration appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the purifier vibrates during operation - TP01: Base vibration identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey ## Verified diagnosis - Photograph the complete TP01: Base vibration display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey - Confirm that the observed condition matches the published meaning: the purifier vibrates during operation - Published check — Move it to a solid level surface and check the external base and filter fit - Published check — stop using it and contact Dyson if vibration continues - Stop at the published service boundary after these actions - do not add a restart or test cycle that Dyson does not specify for TP01: Base vibration - Published check — Give service the TP01: Base vibration photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for TP01: Base vibration ## Evidence-backed actions - Move it to a solid level surface and check the external base and filter fit - stop using it and contact Dyson if vibration continues - Give service the TP01: Base vibration photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Move it to a solid level surface and check the external base and filter fit; stop using it and contact Dyson if vibration continues. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Cool TP01 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/349324-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.