# Dyson Air purifier TP01: Clicking noise error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-tp01-clicking-noise-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-tp01-clicking-noise-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier TP01: Clicking noise: the purifier is making a clicking sound. This interpretation applies to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: TP01: Clicking noise - Model scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey - Region: United States / English ## What users may observe - TP01: Clicking noise is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the purifier is making a clicking sound - The affected function behaves as described by the manufacturer while TP01: Clicking noise is present - The important observation is when TP01: Clicking noise appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the purifier is making a clicking sound - TP01: Clicking noise identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey ## Verified diagnosis - Photograph the complete TP01: Clicking noise display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey - Confirm that the observed condition matches the published meaning: the purifier is making a clicking sound - Published check — Switch off and unplug the TP01, inspect the external loop and base for visible obstruction, and arrange Dyson service if clicking returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Dyson does not specify for TP01: Clicking noise - Published check — Give service the TP01: Clicking noise photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for TP01: Clicking noise ## Evidence-backed actions - Switch off and unplug the TP01, inspect the external loop and base for visible obstruction, and arrange Dyson service if clicking returns - Give service the TP01: Clicking noise photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Switch off and unplug the TP01, inspect the external loop and base for visible obstruction, and arrange Dyson service if clicking returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Cool TP01 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/349324-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.