# Dyson Air purifier TP01: No power error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-tp01-no-power-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-tp01-no-power-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier TP01: No power: the purifier will not start. This interpretation applies to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: TP01: No power - Model scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey - Region: United States / English ## What users may observe - TP01: No power is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the purifier will not start - The appliance reports the documented supply, interruption, wiring, or power-restoration condition - The important observation is when TP01: No power appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the purifier will not start - TP01: No power does not alone locate the fault in the outlet, breaker, cord, installation wiring, appliance wiring, or control - Model boundary — apply this interpretation only to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey ## Verified diagnosis - Photograph the complete TP01: No power display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey - Confirm that the observed condition matches the published meaning: the purifier will not start - Published check — Check the power supply and cable externally, reconnect once, and do not use the machine if the cable, plug, or housing is damaged - Stop at the published service boundary after these actions - do not add a restart or test cycle that Dyson does not specify for TP01: No power - Published check — Give service the TP01: No power photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for TP01: No power ## Evidence-backed actions - Check the power supply and cable externally, reconnect once, and do not use the machine if the cable, plug, or housing is damaged - Give service the TP01: No power photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Check the power supply and cable externally, reconnect once, and do not use the machine if the cable, plug, or housing is damaged. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Cool TP01 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/349324-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.