# Dyson Air purifier TP01: Oscillation fault error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-tp01-oscillation-fault-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-tp01-oscillation-fault-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier TP01: Oscillation fault: the TP01 oscillation function is not operating. This interpretation applies to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: TP01: Oscillation fault - Model scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey - Region: United States / English ## What users may observe - TP01: Oscillation fault is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the TP01 oscillation function is not operating - The affected function behaves as described by the manufacturer while TP01: Oscillation fault is present - The important observation is when TP01: Oscillation fault appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the TP01 oscillation function is not operating - TP01: Oscillation fault identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey ## Verified diagnosis - Photograph the complete TP01: Oscillation fault display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Cool TP01 purifier models covered by the official US troubleshooting journey - Confirm that the observed condition matches the published meaning: the TP01 oscillation function is not operating - Published check — Place the machine level, test the oscillation control once, and arrange service rather than forcing the base or loop - Stop at the published service boundary after these actions - do not add a restart or test cycle that Dyson does not specify for TP01: Oscillation fault - Published check — Give service the TP01: Oscillation fault photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for TP01: Oscillation fault ## Evidence-backed actions - Place the machine level, test the oscillation control once, and arrange service rather than forcing the base or loop - Give service the TP01: Oscillation fault photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Place the machine level, test the oscillation control once, and arrange service rather than forcing the base or loop. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Cool TP01 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/349324-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.