# Dyson Air purifier TP04: Filter needs replacing error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-tp04-filter-needs-replacing-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-tp04-filter-needs-replacing-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier TP04: Filter needs replacing: the TP04 filter counter indicates end of filter service life. This interpretation applies to Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: TP04: Filter needs replacing - Model scope: Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey - Region: United States / English ## What users may observe - TP04: Filter needs replacing is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the TP04 filter counter indicates end of filter service life - The affected function behaves as described by the manufacturer while TP04: Filter needs replacing is present - The important observation is when TP04: Filter needs replacing appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the TP04 filter counter indicates end of filter service life - TP04: Filter needs replacing identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey ## Verified diagnosis - Photograph the complete TP04: Filter needs replacing display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey - Confirm that the observed condition matches the published meaning: the TP04 filter counter indicates end of filter service life - Published check — Switch off, replace the correct genuine TP04 filter, and reset the counter using the Dyson remote procedure - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if TP04: Filter needs replacing remains, stop and move to exact-model diagnosis - Published check — If TP04: Filter needs replacing returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if TP04: Filter needs replacing remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Switch off, replace the correct genuine TP04 filter, and reset the counter using the Dyson remote procedure - If TP04: Filter needs replacing returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If TP04: Filter needs replacing returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Switch off, replace the correct genuine TP04 filter, and reset the counter using the Dyson remote procedure. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Cool TP04 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/310124-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.