# Dyson Air purifier TP04: No airflow error Canonical page: https://getfixfault.com/guides/dyson-air-purifier-tp04-no-airflow-official-code AI-readable URL: https://getfixfault.com/guides/dyson-air-purifier-tp04-no-airflow-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Air purifier TP04: No airflow: the fan produces little or no airflow. This interpretation applies to Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Air purifier - Error code or indicator: TP04: No airflow - Model scope: Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey - Region: United States / English ## What users may observe - TP04: No airflow is shown on the Dyson air purifier display, indicator, or connected app - The published condition is: the fan produces little or no airflow - The affected fill stage does not receive or confirm the expected water supply while TP04: No airflow is active - The important observation is when TP04: No airflow appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the fan produces little or no airflow - TP04: No airflow does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey ## Verified diagnosis - Photograph the complete TP04: No airflow display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey - Confirm that the observed condition matches the published meaning: the fan produces little or no airflow - Published check — Switch off, inspect the filter and external inlet, refit the correct filter, and contact Dyson if the fan still does not deliver airflow - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if TP04: No airflow remains, stop and move to exact-model diagnosis - Published check — If TP04: No airflow returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if TP04: No airflow remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Switch off, inspect the filter and external inlet, refit the correct filter, and contact Dyson if the fan still does not deliver airflow - If TP04: No airflow returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If TP04: No airflow returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Isolate the appliance when safe. Switch off, inspect the filter and external inlet, refit the correct filter, and contact Dyson if the fan still does not deliver airflow. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official Pure Cool TP04 troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/310124-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.