# Dyson Robot vacuum 360 Vis Nav: Bin not fitted error Canonical page: https://getfixfault.com/guides/dyson-robot-vacuum-360-vis-nav-bin-not-fitted-official-code AI-readable URL: https://getfixfault.com/guides/dyson-robot-vacuum-360-vis-nav-bin-not-fitted-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Robot vacuum 360 Vis Nav: Bin not fitted: the robot cannot confirm that the bin is correctly installed. This interpretation applies to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Robot vacuum - Error code or indicator: 360 Vis Nav: Bin not fitted - Model scope: Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey - Region: United States / English ## What users may observe - 360 Vis Nav: Bin not fitted is shown on the Dyson robot vacuum display, indicator, or connected app - The published condition is: the robot cannot confirm that the bin is correctly installed - The affected function behaves as described by the manufacturer while 360 Vis Nav: Bin not fitted is present - The important observation is when 360 Vis Nav: Bin not fitted appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the robot cannot confirm that the bin is correctly installed - 360 Vis Nav: Bin not fitted identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey ## Verified diagnosis - Photograph the complete 360 Vis Nav: Bin not fitted display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey - Confirm that the observed condition matches the published meaning: the robot cannot confirm that the bin is correctly installed - Published check — Remove and refit the bin until it seats fully, then run one supervised test - Published check — do not operate with the bin or seal damaged - Stop at the published service boundary after these actions - do not add a restart or test cycle that Dyson does not specify for 360 Vis Nav: Bin not fitted - Published check — Give service the 360 Vis Nav: Bin not fitted photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for 360 Vis Nav: Bin not fitted ## Evidence-backed actions - Remove and refit the bin until it seats fully, then run one supervised test - do not operate with the bin or seal damaged - Give service the 360 Vis Nav: Bin not fitted photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Remove and refit the bin until it seats fully, then run one supervised test; do not operate with the bin or seal damaged. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official 360 Vis Nav robot vacuum troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/304619-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.