# Dyson Robot vacuum 360 Vis Nav: Charging contacts dirty error Canonical page: https://getfixfault.com/guides/dyson-robot-vacuum-360-vis-nav-charging-contacts-dirty-official-code AI-readable URL: https://getfixfault.com/guides/dyson-robot-vacuum-360-vis-nav-charging-contacts-dirty-official-code.txt Last reviewed: 2026-08-25 ## Direct answer Dyson Robot vacuum 360 Vis Nav: Charging contacts dirty: the dock and robot contacts are not making a reliable connection. This interpretation applies to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey in United States / English. ## Exact scope - Brand: Dyson - Appliance: Robot vacuum - Error code or indicator: 360 Vis Nav: Charging contacts dirty - Model scope: Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey - Region: United States / English ## What users may observe - 360 Vis Nav: Charging contacts dirty is shown on the Dyson robot vacuum display, indicator, or connected app - The published condition is: the dock and robot contacts are not making a reliable connection - Airflow through the documented filter or vent path is restricted or the maintenance condition remains active - The important observation is when 360 Vis Nav: Charging contacts dirty appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the dock and robot contacts are not making a reliable connection - 360 Vis Nav: Charging contacts dirty does not by itself prove a fan, heater, sensor, or control failure before the accessible airflow path is checked - Model boundary — apply this interpretation only to Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey ## Verified diagnosis - Photograph the complete 360 Vis Nav: Charging contacts dirty display before changing controls or removing power - Confirm that the full model number is covered by this scope: Dyson 360 Vis Nav robot vacuum models covered by the official troubleshooting journey - Confirm that the observed condition matches the published meaning: the dock and robot contacts are not making a reliable connection - Published check — Power the robot off and wipe accessible contacts with a dry lint-free cloth, then reseat it on the powered dock - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if 360 Vis Nav: Charging contacts dirty remains, stop and move to exact-model diagnosis - Published check — If 360 Vis Nav: Charging contacts dirty returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if 360 Vis Nav: Charging contacts dirty remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Power the robot off and wipe accessible contacts with a dry lint-free cloth, then reseat it on the powered dock - If 360 Vis Nav: Charging contacts dirty returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If 360 Vis Nav: Charging contacts dirty returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Power the robot off and wipe accessible contacts with a dry lint-free cloth, then reseat it on the powered dock. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Dyson official 360 Vis Nav robot vacuum troubleshooting - Source URL: https://www.dyson.com/support/journey/troubleshooting/304619-01 - Source checked: 2026-08-25 - Procedure verified: 2026-08-25 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.