# Electrolux Cooktop E012 error Canonical page: https://getfixfault.com/guides/electrolux-cooktop-e012 AI-readable URL: https://getfixfault.com/guides/electrolux-cooktop-e012.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Cooktop E012: an electronics fault. This interpretation applies to Electrolux UK ceramic and induction hobs covered by the linked E0/E1 support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Cooktop - Error code or indicator: E012 - Model scope: Electrolux UK ceramic and induction hobs covered by the linked E0/E1 support article - Region: United Kingdom / English ## What users may observe - E012 is shown on the Electrolux cooktop display, indicator, or connected app - The published condition is: an electronics fault - The appliance has reached the manufacturer-defined stop or service condition associated with E012 - The important observation is when E012 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — an electronics fault - E012 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Electrolux UK ceramic and induction hobs covered by the linked E0/E1 support article ## Verified diagnosis - Photograph the complete E012 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK ceramic and induction hobs covered by the linked E0/E1 support article - Confirm that the observed condition matches the published meaning: an electronics fault - Published check — isolate the hob for at least 30 seconds and arrange authorised service if the code returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Electrolux does not specify for E012 - Published check — Give service the E012 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for E012 ## Evidence-backed actions - isolate the hob for at least 30 seconds and arrange authorised service if the code returns - Give service the E012 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. isolate the hob for at least 30 seconds and arrange authorised service if the code returns Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK hob E0/E1 electronics support - Source URL: https://support.electrolux.co.uk/support-articles/article/hob-displays-error-message-e0-e1 - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.