# Electrolux Cooktop E431 error Canonical page: https://getfixfault.com/guides/electrolux-cooktop-e431 AI-readable URL: https://getfixfault.com/guides/electrolux-cooktop-e431.txt Last reviewed: 2026-08-21 ## Direct answer Electrolux Cooktop E431: overheating protection is active. This interpretation applies to Electrolux UK induction hobs and cookers with induction hobs covered by the linked support article in United Kingdom / English. ## Exact scope - Brand: Electrolux - Appliance: Cooktop - Error code or indicator: E431 - Model scope: Electrolux UK induction hobs and cookers with induction hobs covered by the linked support article - Region: United Kingdom / English ## What users may observe - E431 is shown on the Electrolux cooktop display, indicator, or connected app - The published condition is: overheating protection is active - The affected function behaves as described by the manufacturer while E431 is present - The important observation is when E431 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — overheating protection is active - E431 identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Electrolux UK induction hobs and cookers with induction hobs covered by the linked support article ## Verified diagnosis - Photograph the complete E431 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux UK induction hobs and cookers with induction hobs covered by the linked support article - Confirm that the observed condition matches the published meaning: overheating protection is active - Published check — remove cookware, allow the hob to cool, confirm compatible flat cookware, and disconnect power for at least 30 seconds - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if E431 remains, stop and move to exact-model diagnosis - Published check — If E431 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if E431 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - remove cookware, allow the hob to cool, confirm compatible flat cookware, and disconnect power for at least 30 seconds - If E431 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If E431 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. remove cookware, allow the hob to cool, confirm compatible flat cookware, and disconnect power for at least 30 seconds Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux UK induction-hob error-code support - Source URL: https://support.electrolux.co.uk/support-articles/article/hob-displays-error-message-e4-e401-e402-e403-e421-e422-e423-e431-e432-e433 - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.