# Electrolux Dishwasher HO error Canonical page: https://getfixfault.com/guides/electrolux-dishwasher-ho AI-readable URL: https://getfixfault.com/guides/electrolux-dishwasher-ho.txt Last reviewed: 2026-08-24 ## Direct answer Electrolux Dishwasher HO: heater-on mode is active. This interpretation applies to Electrolux US dishwashers covered by the linked official error-code and alarm guide in United States / English. ## Exact scope - Brand: Electrolux - Appliance: Dishwasher - Error code or indicator: HO - Model scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide - Region: United States / English ## What users may observe - HO is shown on the Electrolux dishwasher display, indicator, or connected app - The published condition is: heater-on mode is active - The controls show the documented lock, pause, or setting state until the exact published control action is completed - If operation no longer matches that description, record the new symptom instead of treating the normal HO state as the diagnosis ## Causes or fault boundaries - Manufacturer-defined fault area — heater-on mode is active - HO does not prove a failed control board while the documented control state is active - Model boundary — apply this interpretation only to Electrolux US dishwashers covered by the linked official error-code and alarm guide ## Verified diagnosis - Photograph the complete HO display before changing controls or removing power - Confirm that the full model number is covered by this scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide - Confirm that the observed condition matches the published meaning: heater-on mode is active - Published check — allow the dishwasher to complete the heating phase and arrange service if the display does not clear - Treat HO as normal only while the observed operation matches “heater-on mode is active” - a different symptom needs separate diagnosis - Published check — No component repair is indicated while HO remains the documented status “heater-on mode is active” - Treat HO as normal only while the observed operation matches “heater-on mode is active”; a different symptom needs separate diagnosis ## Evidence-backed actions - allow the dishwasher to complete the heating phase and arrange service if the display does not clear - No component repair is indicated while HO remains the documented status “heater-on mode is active” ## Safety boundary Follow the exact model manual. allow the dishwasher to complete the heating phase and arrange service if the display does not clear Do not open fixed panels or test live circuits. ## Primary evidence - Source: Electrolux US dishwasher error-code and alarm guide - Source URL: https://owner.electrolux.com/support-articles/article/1829620-dishwasher-error-code-guide - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.